.
Morris Industries USA ProAG Header
 
APPLICATION CHART FOR 1995 - 2006 ..AUTO ALIGN® BALE STACKERS
 
Stacker Model Bale Size Bale Orientation # of Bales Per Load
HD4SR Bale Skoop 3' x 4' Dry Bale on strings 6
... 4' x 4' Dry Bale on or off strings 4
. . . .
12SR Bale Skoop 3' x 3' Dry Bale on strings
12
3' x 4' Dry Bale on strings
6
** 
4' x 4' Dry Bale on strings
4
. . . .
12K Bale Runner 3' x 3' Dry Bale on strings 12
... 3' x 4' Dry Bale on strings 6
... 3' x 4' Dry Bale off strings 8
... 4' x 4' Dry Bale on or off strings 4
. . . .
16K Bale Runner 3' x 3' Dry Bale on strings (NH/Case IH/Hesston only) 18
3' x 3' Dry Bale off strings 12
3' x 4' Dry Bale on strings 12
3' x 4' Dry Bale off strings 8
4' x 4' Dry Bale on or off strings 8
. . . .
16K Bale Runner 3' x 3' Wet Bale on or off strings 12
.. 3' x 4' Wet Bale off strings 8
. . . .
 
  • All bales are put "on" strings from the baler.
  • Bale stacker can stack bales that are a minimum of 6.5'   and maximum of 8'.
  • Bales are rotated 180 degrees by the bale stacker as they are picked up and stacked.
* If you are going to pick up the 3x4 or 4x4 dry bales with the 12SR - then you need to disengage the Grab Hooks by turning valve #5 in 2 turns and watch for the long alignment arms so they don't hit the stack due to them sticking out longer than the bale. You want to open the alignment arms prior to backing into the stack. ** If you are picking up only the 4x4 bales then you need to do the above, as well as remove the Bed Extensions by pulling out the pins and taking the extensions off the bed.
 
 
HD4SR AND 12SR MODEL APPLICATION CHART
 
Manufacturer Baler Model Bale Size Bale Orientation
(To pick up the bale)
Stacker Model # Bales/
Load
HESSTON 3' x 3' 4750 34.4" high x 31.5" wide
on strings 12SR 12
  4755 34.4" high x 31.5" wide on strings 12SR 12
  4760 34.4" high x 31.5" wide on strings 12SR 12
HESSTON 3' x 4' 4790 34.4" high x 47.3" wide on strings HD4SR Bed Ext. 6
HESSTON 4' x 4' 4800 50" high x 46.5" wide
on or off strings HD4SR 4
  4900 50" high x 46.5" wide on or off strings HD4SR 4
  4910 50" high x 46.5" wide on or off strings HD4SR 4
CASE IH 3' x 3' 8570 34.4" high x 31.5" wide on strings 12SR 12
  8575 34.4" high x 31.5" wide on strings 12SR 12
  LBX 331 31" high x 33" wide on strings 12SR 12
CASE IH 3' x 4' 8585
34.4" high x 47.25" wide
on strings HD4SR Bed Ext. 6
  LBX 431 33" high x 45" wide on strings HD4SR Bed Ext. 6
CASE IH 4' x 4' 8580
50" high x 46.5" wide on or off strings HD4SR . 4
  8590 50" high x 46.5" wide on or off strings HD4SR . 4
JOHN DEERE (1,000 lbs) 3' x 3' 100 31.5" high x 31.5" wide on strings 12SR 12
NEW HOLLAND 590 35.4" high x 31.5" wide on strings 12SR 12
(1,000 lbs) 3' x 3' BB940 35.4" high x 31.5" wide on strings 12SR 12
NEW HOLLAND 595 35.4" high x 47.2" wide on strings HD4SR Bed Ext. 6
(1,500 lbs) 3' x 4' BB960 35.4" high x 47.2" wide on strings HD4SR Bed Ext 6
FREEMAN 3' x 4' (Dry Conditions Only) 1592 38" high x 46" wide on strings HD4SR Bed Ext. 5 / 6
VERMEER /Freeman (Command Ram) 3'x4' 1034 38" high x 46" wide on strings HD4SR Bed Ext. 5 / 6
VERMEER 3' x 4'
3347
33.5" high x 47.25" wide on strings HD4SR Bed Ext.
6
KRONE 3' x 4'
VFS 128
31.5" high x 47" wide on strings HD4SR Bed Ext.
6
KRONE 3' x 3'
VFS 88
31.5" high x 31.5" wide on strings 12SR
12
CLAAS QUADRANT 2.5' x 4'
2200
27.5" high x 48" wide on strings HD4SR Bed Ext.
7
 
 
  • ALL BALES ARE PUT OUT "ON" STRINGS FROM THE BALER
  • MINIMUM OF A 125 HP FOR SR MODEL RECOMMENDED
  • OPTIMUM FLOW RATE OF 20 GALLONS PER MINUTE
  • HYDRAULIC PRESSURE SHOULD BE A MINIMUM OF 2,250 psi.
  • RECOMMENDED BALE SIZE SHOULD BE A MIN. OF 6 1/2 FEET & MAXIMUM OF 8 FEET
  • BALES ARE ROTATED 180 DEGREES BY THE STACKER AS THEY ARE PICKED UP AND STACKED
  • BALES NEED TO BE FIRM AND DRY FOR THE SR MODELS
 
 
16K BALE RUNNER APPLICATION CHART
 
Manufacturer Baler Model # Bale Size Bale Orientation
(To pick up the bale)
Wet or Dry Bales/
Load
HESSTON 3' x 3' 4750 34.4" high x 31.5" wide on strings WET or DRY 12
  4755 34.4" high x 31.5" wide off strings WET or DRY 12
  4760 34.4" high x 31.5" wide on strings DRY ONLY 18
HESSTON 3' x 4' 4790 34.4" high x 47.3" wide   on strings DRY 12
    34.4" high x 47.3" wide off strings WET or DRY 8
HESSTON 4' x 4' 4800 50" high x 46.5" wide on strings DRY 8
  4900 50" high x 46.5" wide off strings DRY 8
  4910 50" high x 46.5" wide      
CASE IH 3' x 3'   8570 34.4" high x 31.5" wide on strings WET or DRY 12
  8575 34.4" high x 31.5" wide off strings WET or DRY 12
  LBX 331 33" high x 31" wide on strings DRY ONLY 18
CASE IH 3' x 4' 8585 34.4" high x 47.25" wide on strings DRY 12
  LBX 431 33" high x 45" wide off strings WET or DRY 8
CASE IH 4' x 4' 8580 50" high x 46.5" wide on strings DRY 8
  8590 50" high x 46.5" wide off strings DRY 8
JOHN DEERE
(1,000 lbs) 3' x 3'
100 31.5" high x 31.5" wide   on strings DRY 12
NEW HOLLAND
590 35.4" high x 31.5" wide on strings WET or DRY 12
(1,000 lbs) 3' x 3' BB940 35.4" high x 31.5" wide off strings WET or DRY 12
      on strings DRY ONLY 18
NEW HOLLAND 595
35.4" high x 47.2" wide on strings DRY 12
(1,500 lbs) 3' x 4' BB960 35.4" high x 47.2" wide off strings WET or DRY 8
FREEMAN 3' x 4' 1592 38" high x 46" wide   on strings DRY 10 / 12
(Dry Conditions Only)     off strings WET or DRY 7 / 8
VERMEER /Freeman 1034 38" high x 46" wide   on strings DRY 10 / 12
(Command Ram) 3'x4'     off strings WET or DRY 7 / 8
VERMEER 3' x 4' 3347 33.5" high x 47.25" wide on strings
DRY 12
      off strings WET or DRY 8
KRONE 3' x 4' VFS 128 31.5" high x 47" wide on strings
DRY 12
      off strings WET or DRY 8
KRONE 3' x 3' VFS 88 31.5" high x 31.5" wide on strings DRY 12
CLAAS QUADRANT
2.5' x 4'
2200 27.5" high x 48" wide won't work WON'T WORK WON'T WORK
 
 
  • ALL BALES ARE PUT OUT "ON" STRINGS FROM THE BALER
  • MINIMUM OF A 180 HP FOR 16K MODEL RECOMMENDED
  • OPTIMUM FLOW RATE OF 20 GALLONS PER MINUTE
  • HYDRAULIC PRESSURE SHOULD BE A MINIMUM OF 2,250 psi.
  • RECOMMENDED BALE SIZE SHOULD BE A MIN. OF 6 1/2 FEET & MAXIMUM OF 8 FEET
  • BALES ARE ROTATED 180 DEGREES BY THE STACKER AS THEY ARE PICKED UP AND STACKED

Our Company | Products | Application Chart | Cost Analysis Tools | Contact Us | Links | Dealers | Home | Email